aaron@firestop.org

Firestop Engineering Judgments Are Not As-Built Drawings
Engineering Judgments, often called EJs or Technical Evaluations, play an important role in the firestop industry. They help address unique field conditions where a tested and listed firestop system may not match the exact project condition. But there is a growing concern in the industry: Engineering Judgments are increasingly being [...]
Engineering Judgments Done Right: Why Manufacturers Must Be at the Table
Firestop Engineering Judgments (EJs) must involve a manufacturer for seven critical reasons: Expertise in products and systems: Manufacturers have in-depth knowledge of their firestopping products and systems, including their performance characteristics, durability, and safety in real-world applications. Extensive test data: Manufacturers possess a wealth of internal and third-party test data, [...]
Regional Firestop Training Coordinator
Help Us Expand Code-Based Firestop Training Across North America Now Accepting Applications for Regional Firestop Training Coordinators The International Firestop Council (IFC) is expanding its reach and we’re looking for highly connected, organized, and mission-driven professionals to help us deliver more training, to more AHJs, in more places. We're proud [...]
Firestopping, Fire Blocking, Draft Stopping – Know the Difference?
Understanding the terminology around fire safety is essential for ensuring the right measures are in place to protect buildings and occupants. Here’s a quick guide to some of the most common terms: firestopping, fireproofing, fireblocking, and draftstopping. Firestopping refers to methods used to restore the hourly fire-resistance rating [...]
Building Codes Enforcement Playbook
To help code enforcement professionals with everyday responsibilities, the Federal Emergency Management Agency (FEMA) created the Building Codes Enforcement Playbook. The Playbook serves to improve both building administration and code enforcement within jurisdictions to ensure compliance with modern codes, accelerate recovery and support long-term mitigation goals. Section 2.2 of the [...]
New and Updated Firestop Special Inspector Certificate Exam
The International Firestop Council (IFC) is proud to announce the official launch of its newly updated Firestop Special Inspector Certificate Exam, now available to fire and life safety professionals across the globe. Designed for inspectors, code officials, contractors, engineers, and other building professionals, the revised exam reflects the latest in [...]
Understanding ASTM and UL Standards for Firestopping
When it comes to passive fire protection, details matter. The numbers and letters printed on a firestop product’s data sheet or system card are not just technical jargon but the difference between compliance and liability. Let’s break down why ASTM and UL firestop standards are so important, and [...]
Joint System Splicing – Best Practice
Condition: Multiple manufacturer's products in the same construction assembly In line splice conditions: ASTM E1966 section 7.3 specifically requires a splice that is either a “Factory” or “Manufacturer” or both if applicable for a fire tested material. If the splice is the same for both applications, only one splice [...]
Raising the Standard: Why Architects Should Specify UL’s TEDP-Accredited Firestop Manufacturers
When designing for life safety, you rely on more than just product specs—you rely on trusted systems, tested solutions, and credible documentation. In firestopping, where conditions on-site often don’t match what's in a tested listing, engineering judgments (EJs) become an essential tool. But without a standard process, the quality of [...]



